Z86CCP00ZEM Z8(R) CCP Emulator 32K Memory Expansion Procedure Technical Article TA000101-0202 Materials * Soldering iron with minimum 700F, small chisel point * Desoldering pump * Solder wire, preferably ROSIN CORE 60/40 * Wire stripper and wire-wrap/jumper wires * Two 28-pin IC sockets, 600mils (optional) * Two 32K x 8 SRAM--IDT71256, CYPRESS CY7C198, or equivalent; 70ns (or faster) access time Hardware Procedure 1. Desolder and remove U19 and U23 (8K x 8 SRAMS). 2. Desolder and remove R25 and R16 (4.7K resistors). 3. Optional: Insert a 28-pin (600 mils) IC socket each on U19 and U23, then solder. 4. Insert one each of 32K x 8 SRAM to U19 and U23. Solder if not socketed. 5. Make the following jumper wire connections: a. U19-1 to U23-1 to U22-16 (A13). b. U19-26 to U23-26 to U22-15 (A14). Software Procedure 1. In the Z8ICE Program Group, copy the Z8ICE icon to the same program group. (Drag the Z8ICE icon to the side while pressing the CTRL key.) 2. Select the copied Z8ICE icon and open up the Properties dialog box from the File menu to modify the following: Description Command line: From To Z8ICE Z8ICE CCP_32K ..\Z8ICE.exe ..\Z8ICE.exe C50 3. Click OK. 4. Download the Z8ICE GUI 3.15D ICEBOX software from the ZiLOG website. Select emulator Z86CCP00ZEM/32K. ZiLOG Worldwide Headquarters * 532 Race Street * San Jose, CA 95126 Telephone: 408.558.8500 * Fax: 408.558.8300 * www.ZiLOG.com Z8(R) Z86CCP00ZEM CCP Emulator 32K Memory Expansion Procedure 2 This publication is subject to replacement by a later edition. To determine whether a later edition exists, or to request copies of publications, contact: ZiLOG Worldwide Headquarters 532 Race Street San Jose, CA 95126 Telephone: 408.558.8500 Fax: 408.558.8300 www.ZiLOG.com Document Disclaimer ZiLOG is a registered trademark of ZiLOG Inc. in the United States and in other countries. All other products and/or service names mentioned herein may be trademarks of the companies with which they are associated. ZiLOG is a registered trademark of ZiLOG Inc. in the United States and in other countries. All other products and/or service names mentioned herein may be trademarks of the companies with which they are associated. (c)2002 by ZiLOG, Inc. All rights reserved. Information in this publication concerning the devices, applications, or technology described is intended to suggest possible uses and may be superseded. ZiLOG, INC. DOES NOT ASSUME LIABILITY FOR OR PROVIDE A REPRESENTATION OF ACCURACY OF THE INFORMATION, DEVICES, OR TECHNOLOGY DESCRIBED IN THIS DOCUMENT. ZiLOG ALSO DOES NOT ASSUME LIABILITY FOR INTELLECTUAL PROPERTY INFRINGEMENT RELATED IN ANY MANNER TO USE OF INFORMATION, DEVICES, OR TECHNOLOGY DESCRIBED HEREIN OR OTHERWISE. Except with the express written approval ZiLOG, use of information, devices, or technology as critical components of life support systems is not authorized. No licenses or other rights are conveyed, implicitly or otherwise, by this document under any intellectual property rights. TA000101-0202